Butyl Rubber Sheet Waterproofing For Light Transmitting Panels Waterproof Butyl Rubber Tape

Butyl Rubber Waterproof Tape, Used For Light-transmitting Panels (pc Panels / Sunlight Panels

Product Features:

1. Material Friendliness: The formula contains no organic solvents thatrode PC materials, and long-term use will not cause stress cracking or crazing on the surface of lighting panels. 2. Deformation Conform: With soft texture, it can follow the slight bending deformation of lighting panels, and there will no problem that the metal aluminum foil layer restricts the expansion and contraction of the. 3. Light Transmittance Adaptation: Some products adopt a non-woven fabric surface layer, will not block the light transmittance of lighting panels and will not affect the lighting of sunrooms. 4. Weather Resistance: When exposed to UV for a long time, the adhesive layer will not yellow or leak oil, and will not contaminate the surface of lighting panels.

Construction Method:

1. Substrate Cleaning: Wipe the dust from the of the daylighting panels with a soft cloth. It is strictly prohibited to wipe panel surface with organic solvents to avoid corrosion of PC material. 2. Tape Application: Stick butyl tape into the grooves on both sides of the aluminum alloy pressure plate, press firmly and then tear off the release paper. 3. Pressure Plateing: Align the aluminum alloy pressure plate with the joint of the daylighting and put it down. Tighten and fix evenly with waterproof screws to make the tape fill the gap between the pressure plate and the daylighting panel. 4. Corner Reinforcement: At the internal and external corners where the daylighting panels meet the wall, an additional layer of single-sided aluminum foil butyl tape shall be pasted for sealing and reinforcement.

Technical Index Requirements