Producten
Huis / Producten / Polymeer gemodificeerde cementwaterdichting /

Flexible Rigid Composite Polymer Modified Cement Waterproofing TypeⅠ No Crack At -10℃

Flexible Rigid Composite Polymer Modified Cement Waterproofing TypeⅠ No Crack At -10℃

Merknaam: shhous
Modelnummer: Type I, Type II, Type III
MOQ: 1000KG
Prijs: USD 0.8‑1.1/kg
Toeleveringsvermogen: 1000000 kg per maand
Detailinformatie
Plaats van herkomst:
Shandong, China
Certificering:
ISO
Producteigenschap:
Gecombineerde stijve-flexibele waterdichte prestaties
Solide inhoud:
≥70%
Productsamenstelling:
Tweecomponenten, vloeibare component + poedercomponent
Filmkarakteristiek:
Vormt na uitharding een flexibele waterdichte film
flexibiliteit bij lage temperaturen:
TypeⅠ geen barst bij -10℃
Water ondoordringbaarheid:
Waterdicht bij 0,3 MPa gedurende 30 minuten
Toepassingsmethode:
Applicatie met kwast, rol en troffel mogelijk
Constructie substraat:
Toepasbaar op vochtige ondergrond zonder stilstaand water
Verpakking Details:
Emmers+Zakken
Markeren:

composite polymer modified cement waterproofing

,

composite acrylic modified cementitious waterproofing

,

flexible rigid polymer modified cement waterproofing

Productomschrijving
Flexible Rigid Composite Js Waterproof CoatingSubstrate PreparationThe substrate shall be sound, flat and clean. Remove laitance, dust, oil stains and loose layers. Repair holes and cracks in advance. Fully wet the substrate before construction, keep it damp without standing water. Clean and polish vulnerable details such as corners, pipe penetrations and construction joints.Two‑component MixingFollow the mixing ratio strictly. Add liquid component first, then powder